head	1.4;
access;
symbols
	pkgsrc-2018Q3:1.3.0.4
	pkgsrc-2018Q3-base:1.3
	pkgsrc-2018Q2:1.3.0.2
	pkgsrc-2018Q2-base:1.3
	pkgsrc-2018Q1:1.1.0.2
	pkgsrc-2018Q1-base:1.1;
locks; strict;
comment	@# @;


1.4
date	2018.12.14.00.52.26;	author jmcneill;	state dead;
branches;
next	1.3;
commitid	AKgfN5HadMtGAH3B;

1.3
date	2018.05.25.20.49.52;	author jakllsch;	state Exp;
branches;
next	1.2;
commitid	5S89tnqKgeB3KIDA;

1.2
date	2018.05.25.10.45.22;	author jmcneill;	state dead;
branches;
next	1.1;
commitid	asIaF1oVbj5OoFDA;

1.1
date	2018.01.10.00.55.27;	author jakllsch;	state Exp;
branches;
next	;
commitid	Wlbm18Xtudo7tgmA;


desc
@@


1.4
log
@Update U-Boot to 2018.11.
@
text
@$NetBSD: patch-arch_arm_dts_sun50i-h5-nanopi-neo-plus2.dts,v 1.3 2018/05/25 20:49:52 jakllsch Exp $

Enable use of the NanoPi Neo Plus2's onboard Ethernet.

Templated from the orangepi-pc2.dts.

--- arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts.orig	2018-05-07 15:32:36.000000000 +0000
+++ arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts
@@@@ -104,3 +104,18 @@@@
 &usbphy {
 	status = "okay";
 };
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@@7 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
@


1.3
log
@Restore Ethernet support in u-boot-nanopi-neo-plus2.
@
text
@d1 1
a1 1
$NetBSD$
@


1.2
log
@Update U-Boot to 2018.05.
@
text
@d1 1
a1 1
$NetBSD: patch-arch_arm_dts_sun50i-h5-nanopi-neo-plus2.dts,v 1.1 2018/01/10 00:55:27 jakllsch Exp $
d3 5
a7 1
--- arch/arm/dts/sun50i-h5-nanopi-neo-plus2.dts.orig	2018-01-10 00:43:42.000000000 +0000
d9 4
a12 109
@@@@ -0,0 +1,120 @@@@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@@aosc.io>
+ * Copyright (C) 2017 Jagan Teki <jteki@@openedev.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "FriendlyARM NanoPi NEO Plus 2";
+	compatible = "friendlyarm,nanopi-neo-plus2", "allwinner,sun50i-h5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	compatible = "allwinner,sun50i-h5-mmc",
+		     "allwinner,sun50i-a64-mmc",
+		     "allwinner,sun5i-a13-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
d18 1
a18 1
+	phy = <&phy7>;
d20 1
d22 3
a24 1
+	phy7: ethernet-phy@@7 {
@


1.1
log
@Add u-boot for nanopi-neo-plus2.

Backported from u-boot master, with some added adjustments.
@
text
@d1 1
a1 1
$NetBSD$
@