head 1.2; access; symbols netbsd-5-2-3-RELEASE:1.2 netbsd-5-1-5-RELEASE:1.2 riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.2 riastradh-drm2-base:1.2 netbsd-5-2-2-RELEASE:1.2 netbsd-5-1-4-RELEASE:1.2 netbsd-5-2-1-RELEASE:1.2 netbsd-5-1-3-RELEASE:1.2 netbsd-5-2:1.2.0.8 netbsd-5-2-RELEASE:1.2 netbsd-5-2-RC1:1.2 netbsd-5-1-2-RELEASE:1.2 netbsd-5-1-1-RELEASE:1.2 netbsd-5-1:1.2.0.6 netbsd-5-1-RELEASE:1.2 netbsd-5-1-RC4:1.2 netbsd-5-1-RC3:1.2 netbsd-5-1-RC2:1.2 netbsd-5-1-RC1:1.2 netbsd-5-0-2-RELEASE:1.2 netbsd-5-0-1-RELEASE:1.2 netbsd-5-0:1.2.0.4 netbsd-5-0-RELEASE:1.2 netbsd-5-0-RC4:1.2 netbsd-5-0-RC3:1.2 netbsd-5-0-RC2:1.2 netbsd-5-0-RC1:1.2 netbsd-5:1.2.0.2 netbsd-5-base:1.2 netbsd-2-0-3-RELEASE:1.1.1.5 netbsd-2-1:1.1.1.5.0.8 netbsd-2-1-RELEASE:1.1.1.5 netbsd-2-1-RC6:1.1.1.5 netbsd-2-1-RC5:1.1.1.5 netbsd-2-1-RC4:1.1.1.5 netbsd-2-1-RC3:1.1.1.5 netbsd-2-1-RC2:1.1.1.5 netbsd-2-1-RC1:1.1.1.5 netbsd-2-0-2-RELEASE:1.1.1.5 netbsd-2-0-1-RELEASE:1.1.1.5 netbsd-2:1.1.1.5.0.6 netbsd-2-base:1.1.1.5 netbsd-2-0-RELEASE:1.1.1.5 netbsd-2-0-RC5:1.1.1.5 netbsd-2-0-RC4:1.1.1.5 netbsd-2-0-RC3:1.1.1.5 netbsd-2-0-RC2:1.1.1.5 netbsd-2-0-RC1:1.1.1.5 netbsd-2-0:1.1.1.5.0.4 netbsd-2-0-base:1.1.1.5 netbsd-1-6-PATCH002-RELEASE:1.1.1.5 netbsd-1-6-PATCH002:1.1.1.5 netbsd-1-6-PATCH002-RC4:1.1.1.5 netbsd-1-6-PATCH002-RC3:1.1.1.5 netbsd-1-6-PATCH002-RC2:1.1.1.5 netbsd-1-6-PATCH002-RC1:1.1.1.5 netbsd-1-6:1.1.1.5.0.2 netbsd-1-6-base:1.1.1.5 netbsd-1-6-PATCH001:1.1.1.5 netbsd-1-6-RELEASE:1.1.1.5 netbsd-1-5-PATCH003:1.1.1.5 netbsd-1-5-PATCH002:1.1.1.5 netbsd-1-5-PATCH001:1.1.1.5 xf-3_3-branch-2001-03-05:1.1.1.5 netbsd-1-5-RELEASE:1.1.1.5 netbsd-1-4-PATCH003:1.1.1.5 netbsd-1-4-PATCH002:1.1.1.5 v3-3-6:1.1.1.5 comdex-fall-1999:1.1.1.5 v3-3-5:1.1.1.5 v3-3-4:1.1.1.5 netbsd-1-4-PATCH001:1.1.1.4 netbsd-1-4-RELEASE:1.1.1.4 v3-3-3-1:1.1.1.4 netbsd-1-3-PATCH003:1.1.1.4 v3-3-3:1.1.1.4 pre-xf86-3-3-3-import:1.1.1.3 netbsd-1-3-PATCH002:1.1.1.3 v3-3-2:1.1.1.3 netbsd-1-3-RELEASE:1.1.1.2 v3-3-1:1.1.1.2 v3-3:1.1.1.2 v3-2:1.1.1.1 XF86:1.1.1; locks; strict; comment @# @; 1.2 date 2005.01.07.18.53.48; author tron; state dead; branches; next 1.1; 1.1 date 97.03.15.06.12.37; author scottr; state Exp; branches 1.1.1.1; next ; 1.1.1.1 date 97.03.15.06.12.37; author scottr; state Exp; branches; next 1.1.1.2; 1.1.1.2 date 97.06.30.13.16.56; author mrg; state Exp; branches; next 1.1.1.3; 1.1.1.3 date 98.03.08.09.09.36; author veego; state Exp; branches; next 1.1.1.4; 1.1.1.4 date 98.11.23.15.37.57; author veego; state Exp; branches; next 1.1.1.5; 1.1.1.5 date 99.07.20.17.46.49; author veego; state Exp; branches; next ; desc @@ 1.2 log @EOL of XFree86 3.3.6, approved by core@@NetBSD.org @ text @ Information for Solaris for x86 Users David Holland 25 October 1996 1. What is XFree86 3.2 XFree86 3.2 is a port of X11R6.1 that supports several versions of Intel-based Unix. It is derived from X386 1.2 which was the X server distributed with X11R5. this release consists of many new features and performance improvements as well as many bug fixes. The release is available as source patches against the X Consortium code, as well as binary distributions for many architectures. The sources for XFree86 are available by anonymous ftp from: ftp.XFree86.org:/pub/XFree86/current Solaris binaries for XFree86 are available for anonymous ftp from: ftp.XFree86.org:/pub/XFree86/current/binaries/Solaris 2. Solaris for x86, versions on which XFree86 3.2 has been tested XFree86 3.2 has been actively tested on: o Solaris 2.4 for x86 FCS o Solaris 2.5.1 for x86 And is expected to run under: o Solaris 2.4 EA2 for x86 o Solaris 2.5 for x86 3. The VT-switching sub-system in Solaris x86 The virtual terminal sub-system is a undocumented, and unsupported feature of Solaris x86. Therefore if you use Virtual Terminals, you do so at YOUR OWN RISK. The virtual terminals of Solaris work basically the same way as most other Intel based SVR4 VT sub-systems. However, there are a number of limitations documented below. First, if you are running a Solaris 2.4 x86 system, and you want VT's, you will have to create the necessary devices first, so become root. First verify the chanmux device driver's major number is 100: # grep -i chanmux /etc/name_to_major chanmux 100 # If the number after 'chanmux' is anything but 100, I would suggest you immediately abort your attempt to create virtual terminals, and learn to live without them. However, if it is 100, then as root type the following commands to create the maximum allowable number of virtual terminals. # cd /dev # mknod vt01 c 100 1 # mknod vt02 c 100 2 # mknod vt03 c 100 3 # mknod vt04 c 100 4 # mknod vt05 c 100 5 # mknod vt06 c 100 6 # mknod vt07 c 100 7 There is no need for a reconfiguration boot. Secondly, for both 2.1, and 2.4 x86 systems, add a few lines to the inittab to enable logins on them. (Note, do NOT make a mistake here, you could lock yourself out of the system) --------------------->Snip Snip<----------------------------------------------- v1:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT01 login: " -T AT386 -d /dev/vt01 -l console v2:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT02 login: " -T AT386 -d /dev/vt02 -l console v3:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT03 login: " -T AT386 -d /dev/vt03 -l console v4:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT04 login: " -T AT386 -d /dev/vt04 -l console ---------------------->End Here<----------------------------------------------- These four lines enable four VT's on Alt-SysReq-F1 through Alt-SysReq- F4. Then execute the command 'init q' to immediately enable the virtual terminals. The keys used for VT switching are as follows: Alt-SysReq-F1 through Alt-SysReq-F7 enable VT screens 1-7 respectively (if the VT is active). Alt-SysReq-n enables the next active VT screen. Alt-SysReq-p enables the previous active VT screen. Alt-SysReq-h returns to the console. If you are using virtual terminals, you must leave at least one free for use by the Xserver. Limitations of the virtual terminal sub-system under Solaris x86: There are only a total of 8 available VT's (7 normal VT's + 1 console) not the usual 15. If you have all 8 allocated, and you attempt to allocate a additional VT you will panic the system. (This bug is worked around in the Solaris XFree86 Xserver.) From a programming stand point, they work pretty much as documented in the AT&T Unix System V/386 Release 4 Integrated Software Development Guide, however a number of ioctl() calls are broken. 4. Notes for building XFree86 on Solaris x86 1. The majority of all modifications you will need to make are now in ~xc/config/cf/xf86site.def, except one. You will need to set OSName, and OSMinorVersion correctly in ~xc/config/cf/sun.cf. Under Solaris 2.1 for x86, sun.cf needs to read (near the top of the file) #ifdef SVR4Architecture #ifdef i386Architecture #define OSName SunOS 5.1 x86 XCOMM operating system: OSName #define OSMajorVersion 5 #define OSMinorVersion 1 Under Solaris 2.4 for x86, sun.cf needs to read (near the top of the file) #ifdef SVR4Architecture #ifdef i386Architecture #define OSName SunOS 5.4 x86 XCOMM operating system: OSName #define OSMajorVersion 5 #define OSMinorVersion 4 2. Both Gcc, and ProWorks are supported by XFree86. Gcc-2.5.8 or gcc-2.7.2 are suggested, Gcc-2.6.0 is known not to work. You also need to set HasGcc2 correctly in ~xc/config/cf/xf86site.def. You should also make certain your version of GCC predefines `sun'. 2.4.5 is known NOT to by default. If needed edit /usr/local/lib/gcc-lib/*/*/specs, and modify the *predefines: line. Note: A Threaded Xlib compiled with GCC has subtle problems. It'll work 98% of the time, however clients will occasionally exhibit strange hangs. Most notably image viewers such as xv-3.10 exhibit this problem. It is recommended that you set ThreadedX in ~xc/config/cf/sun.cf to NO, if you are using GCC. ProWorks does not have this problem. 3. If you are using ProWorks to compile the XFree86 distribution, you need to modify your PATH appropriately so the ProWorks tools are available. 4. You MUST put /usr/ccs/bin at the front of your PATH. There are known problems with some GNU replacements for the utilities found there. So the /usr/ccs/bin versions of these programs must be found before any other possible GNU versions. (Most notably GNU 'ar' does not work during the build). 5. If you wish to use the "memory aperture" feature of the S3, and Mach32 servers, you need to compile, and install the Solaris x86 aperture driver for memory mapped I/O support. This driver is REQUIRED for the I128, P9000 and Mach 64 servers. The source for this driver is included in ~xc/programs/Xserver/hw/xfree86/etc/apSolx86.shar. Building, and installing the driver is relatively straight forward. Please read its accompanying README file. You also need to set HasSolx86apertureDrv to YES in ~xc/config/cf/xf86site.def. 5. Notes for running XFree86 on Solaris x86 1. If you have not made the Virtual Terminal devices, you will need to specify the terminal device to run the Xserver on. The correct device is vt00 so your xinit command would look like so: xinit -- vt00 If you have made the virtual terminal devices you do not need to specify the VT to run the Xserver on. To be able to run XF86Setup, you must at least create /dev/vt01. Otherwise XF86Setup won't start. 2. For Solaris you will probably want to set your LD_LIBRARY_PATH to /usr/X11R6/lib:/usr/openwin/lib:/usr/dt/lib. Including /usr/X11R6/lib in your LD_LIBRARY_PATH is probably not necessary, however it doesn't hurt. :) Including /usr/openwin/lib in the LD_LIBRARY_PATH is recommended because some Sun supplied binaries were not compiled with LD_RUN_PATH set properly at compile time. Motif and CDE applications may require /usr/dt/lib in your LD_LIBRARY_PATH too. 3. Xqueue is NOT supported under Solaris. The includes necessary for Xqueue are available, however the driver does not seem to be in the kernel. (Go figure) 4. If you want to use xdm with Solaris, extract the files from the shar file in /usr/X11R6/lib/X11/etc/XdmConf.svr4 into a temporary directory. The README file tells where the individual files need to be installed. Be sure to read through each file and make any site-specific changes that you need. 6. Known bugs, and work arounds with Solaris x86 1. The Solaris 2.1 for x86 OpenWindows filemgr does not work against a X11R5 Xserver, it probably will also not work against a X11R6 Xserver. Attempting to 'Drag and Drop' a file causes the filemgr to abort with a 'X error' Solaris 2.4 does not have this problem. There is no known work around. 2. It has been reported that the aperture driver doesn't work under Solaris 2.5.1. It probably doesn't work either under 2.5. 7. Bug Notification Bug reports need to be sent to XFree86@@XFree86.org, or posted to the comp.windows.x.i386unix newsgroup. Questions or comments about the Solaris support, or the Solaris distribution need to be made to davidh@@use.com, or danson@@lgc.com. Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/SOLX86.sgml,v 3.9 1996/10/26 09:38:55 dawes Exp $ $XConsortium: SOLX86.sgml /main/4 1995/11/12 20:00:07 kaleb $ $XFree86: xc/programs/Xserver/hw/xfree86/doc/README.SOLX86,v 3.15 1996/10/26 10:34:56 dawes Exp $ @ 1.1 log @Initial revision @ text @@ 1.1.1.1 log @XFree86 3.2 sources @ text @@ 1.1.1.2 log @XFree86 3.3 sources. @ text @d1 3 d5 1 d7 6 d14 1 d16 2 d20 1 d22 2 a25 1 Information for Solaris for x86 Users d27 1 a27 1 David Holland d29 1 a29 1 16 May 1997 d31 1 d33 1 d35 1 a35 1 1. What is XFree86 3.3 d37 1 a37 5 XFree86 3.3 is a port of X11R6.3 that supports several versions of Intel-based Unix. It is derived from X386 1.2 which was the X server distributed with X11R5. This release consists of many new features and performance improvements as well as many bug fixes. The release is available as source patches against the X Consortium code, as well as binary distributions for many architectures. d39 1 a39 1 The sources for XFree86 are available by anonymous ftp from: d41 1 a41 1 ftp://ftp.XFree86.org/pub/XFree86/current d43 3 d47 3 a49 1 Solaris binaries for XFree86 are available for anonymous ftp from: d51 2 a52 1 ftp://ftp.XFree86.org/pub/XFree86/current/binaries/Solaris d54 1 a55 1 2. Solaris for x86, versions on which XFree86 3.3 has been tested a56 1 XFree86 3.3 has been actively tested on: d58 3 a60 1 o Solaris 2.4 for x86 FCS a61 1 o Solaris 2.5.1 for x86 a62 1 And is expected to run under: a63 1 o Solaris 2.4 EA2 for x86 d65 1 a65 1 o Solaris 2.5 for x86 d67 2 a69 1 3. The VT-switching sub-system in Solaris x86 a70 3 The virtual terminal sub-system is a undocumented, and unsupported feature of Solaris x86. Therefore if you use Virtual Terminals, you do so at YOUR OWN RISK. d72 2 a73 3 The virtual terminals of Solaris work basically the same way as most other Intel based SVR4 VT sub-systems. However, there are a number of limitations documented below. a74 1 First, if you are running a Solaris 2.4 x86 system, and you want VT's, you will d77 8 a84 1 Information for Solaris for x86 Users d89 1 d91 2 a92 1 Information for Solaris for x86 Users d94 2 d98 6 a103 1 have to create the necessary devices first, so become root. a104 1 First verify the chanmux device driver's major number is 100: d106 2 a107 3 # grep -i chanmux /etc/name_to_major chanmux 100 # d109 2 d112 1 a112 3 If the number after 'chanmux' is anything but 100, I would suggest you immedi- ately abort your attempt to create virtual terminals, and learn to live without them. d115 2 d118 1 a118 2 However, if it is 100, then as root type the following commands to create the maximum allowable number of virtual terminals. d120 1 a120 8 # cd /dev # mknod vt01 c 100 1 # mknod vt02 c 100 2 # mknod vt03 c 100 3 # mknod vt04 c 100 4 # mknod vt05 c 100 5 # mknod vt06 c 100 6 # mknod vt07 c 100 7 d122 1 a123 1 There is no need for a reconfiguration boot. d125 2 a126 2 Secondly, for both 2.1, and 2.4 x86 systems, add a few lines to the inittab to enable logins on them. d128 1 a128 1 (Note, do NOT make a mistake here, you could lock yourself out of the system) d130 2 a131 6 --------------------->Snip Snip<----------------------------------------------- v1:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT01 login: " -T AT386 -d /dev/vt01 -l console v2:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT02 login: " -T AT386 -d /dev/vt02 -l console v3:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT03 login: " -T AT386 -d /dev/vt03 -l console v4:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` VT04 login: " -T AT386 -d /dev/vt04 -l console ---------------------->End Here<----------------------------------------------- d133 2 d136 3 a138 1 These four lines enable four VT's on Alt-SysReq-F1 through Alt-SysReq-F4. d140 1 a140 1 Then execute the command 'init q' to immediately enable the virtual terminals. a141 1 The keys used for VT switching are as follows: d143 3 d148 2 d152 6 d161 2 d165 6 d174 4 d179 4 a182 1 Information for Solaris for x86 Users d184 4 d189 3 d193 3 a195 2 Alt-SysReq-F1 through Alt-SysReq-F7 enable VT screens 1-7 respec- tively (if the VT is active). a196 1 Alt-SysReq-n enables the next active VT screen. a197 1 Alt-SysReq-p enables the previous active VT screen. d199 5 a203 1 Alt-SysReq-h returns to the console. d205 4 d210 4 a213 2 If you are using virtual terminals, you must leave at least one free for use by the Xserver. d215 2 a216 1 Limitations of the virtual terminal sub-system under Solaris x86: d218 1 a218 4 There are only a total of 8 available VT's (7 normal VT's + 1 console) not the usual 15. If you have all 8 allocated, and you attempt to allocate a additional VT you will panic the system. (This bug is worked around in the Solaris XFree86 Xserver.) a219 3 From a programming stand point, they work pretty much as documented in the AT&T Unix System V/386 Release 4 Integrated Software Development Guide, however a number of ioctl() calls are broken. d221 3 a224 1 4. Notes for building XFree86 on Solaris x86 a225 2 1. The majority of all modifications you will need to make are now in ~xc/config/cf/xf86site.def. d227 1 a228 3 2. Both Gcc, and ProWorks are supported by XFree86. Gcc-2.5.8 or gcc-2.7.2 are suggested, Gcc-2.6.0 is known not to work. You also need to set Has- Gcc2 correctly in ~xc/config/cf/xf86site.def. a229 3 You should also make certain your version of GCC predefines `sun'. 2.4.5 is known NOT to by default. If needed edit /usr/local/lib/gcc- lib/*/*/specs, and modify the *predefines: line. a230 3 Note: A Threaded Xlib compiled with GCC has subtle problems. It'll work 98% of the time, however clients will occasionally exhibit strange hangs. Most notably image viewers such as xv-3.10 exhibit this problem. d232 2 a233 2 It is recommended that you set ThreadedX in ~xc/config/cf/sun.cf to NO, if you are using GCC. ProWorks does not have this problem. d235 2 a236 3 3. To build XFree86 with gcc you need gcc and (optionally) c++filt from GNU binutils. Don't install gas or ld from GNU binutils, use the one pro- vided by Sun. d238 4 a241 3 With XFree86 3.3, you will need to setup a /opt/SUNWspro/bin directory containing symbolic links named cc, CC, and c++filt pointing respectively to the actual gcc, g++ and c++filt commands. d243 3 d247 2 d250 3 d254 5 d260 1 d265 4 a268 1 Information for Solaris for x86 Users d270 1 d272 1 d274 2 a275 2 4. If you don't have c++filt or if you have troubles in making World with c++filt, you need to set UseExportLists to NO in ~xc/config/cf/host.def. d277 1 d279 4 a283 3 5. If you are using ProWorks to compile the XFree86 distribution, you need to modify your PATH appropriately so the ProWorks tools are available. Normally, they should be in /opt/SUNWspro/bin d285 1 a285 5 6. You MUST put /usr/ccs/bin at the front of your PATH. There are known problems with some GNU replacements for the utilities found there. So the /usr/ccs/bin versions of these programs must be found before any other possible GNU versions. (Most notably GNU 'ar' does not work during the build). a286 4 7. If you wish to use the "memory aperture" feature of the S3, and Mach32 servers, you need to compile, and install the Solaris x86 aperture driver for memory mapped I/O support. This driver is REQUIRED for the I128, P9000 and Mach 64 servers. a287 2 You need to set HasSolx86apertureDrv to YES in ~xc/con- fig/cf/xf86site.def. a288 1 to enable the aperture driver. a289 3 Under Solaris 2.5 and 2.5.1, there's a system driver (/dev/xsvc that pro- vides this functionality. It will be detected automatically by the server, so you don't need to install the driver. d291 1 a291 4 For Solaris 2.1 and 2.4, the source for this driver is included in ~xc/programs/Xserver/hw/xfree86/etc/apSolx86.shar. Building, and installing the driver is relatively straight forward. Please read its accompanying README file. a293 1 5. Notes for running XFree86 on Solaris x86 a294 3 1. If you have not made the Virtual Terminal devices, you will need to spec- ify the terminal device to run the Xserver on. The correct device is vt00 so your xinit command would look like so: a295 1 xinit -- vt00 a297 2 If you have made the virtual terminal devices you do not need to specify the VT to run the Xserver on. a298 2 To be able to run XF86Setup, you must at least create /dev/vt01. Other- wise XF86Setup won't start. a299 4 2. For Solaris you will probably want to set your LD_LIBRARY_PATH to /usr/X11R6/lib:/usr/openwin/lib:/usr/dt/lib. Including /usr/X11R6/lib in your LD_LIBRARY_PATH is probably not necessary, however it doesn't hurt. :) a307 1 Information for Solaris for x86 Users a310 3 Including /usr/openwin/lib in the LD_LIBRARY_PATH is recommended because some Sun supplied binaries were not compiled with LD_RUN_PATH set prop- erly at compile time. a311 2 Motif and CDE applications may require /usr/dt/lib in your LD_LIBRARY_PATH too. a312 3 3. Xqueue is NOT supported under Solaris. The includes necessary for Xqueue are available, however the driver does not seem to be in the kernel. (Go figure) a313 5 4. If you want to use xdm with Solaris, extract the files from the shar file in /usr/X11R6/lib/X11/etc/XdmConf.svr4 into a temporary directory. The README file tells where the individual files need to be installed. Be sure to read through each file and make any site-specific changes that you need. a315 1 6. Known bugs, and work arounds with Solaris x86 a316 4 1. The Solaris 2.1 for x86 OpenWindows filemgr does not work against a X11R5 Xserver, it probably will also not work against a X11R6 Xserver. Attempting to 'Drag and Drop' a file causes the filemgr to abort with a 'X error' a317 1 Solaris 2.4 does not have this problem. a318 1 There is no known work around. a320 1 7. Bug Notification a321 3 Bug reports need to be sent to XFree86@@XFree86.org, or posted to the comp.win- dows.x.i386unix newsgroup. Questions or comments about the Solaris support, or the Solaris distribution need to be made to davidh@@use.com, or danson@@lgc.com. a322 1 Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/SOLX86.sgml,v 3.12.2.4 1997/05/24 08:36:08 dawes Exp $ a327 1 $XConsortium: SOLX86.sgml /main/7 1996/10/28 05:43:28 kaleb $ d332 1 a332 146 Information for Solaris for x86 Users CONTENTS 1. What is XFree86 3.3 ...................................................... 1 2. Solaris for x86, versions on which XFree86 3.3 has been tested ........... 1 3. The VT-switching sub-system in Solaris x86 ............................... 1 4. Notes for building XFree86 on Solaris x86 ................................ 3 5. Notes for running XFree86 on Solaris x86 ................................. 4 6. Known bugs, and work arounds with Solaris x86 ............................ 5 7. Bug Notification ......................................................... 5 i $XFree86: xc/programs/Xserver/hw/xfree86/doc/README.SOLX86,v 3.20.2.4 1997/05/24 09:12:07 dawes Exp $ @ 1.1.1.3 log @XFree86 3.3.2 sources @ text @d14 1 a14 1 25 Feb 1998 d18 1 a18 1 1. What is XFree86 3.3.2 d20 5 a24 6 XFree86 3.3.2 is a port of X11R6.3 that supports several versions of Intel- based Unix. It is derived from X386 1.2 which was the X server distributed with X11R5. This release consists of many new features and performance improvements as well as many bug fixes. The release is available as source patches against the X Consortium code, as well as binary distributions for many architectures. d36 1 a36 1 2. Solaris for x86, versions on which XFree86 3.3.2 has been tested d38 1 a38 1 XFree86 3.3.2 has been actively tested on: a43 2 o Solaris 2.6 for x86 d59 3 a73 3 documented below. First, if you are running a Solaris 2.4 x86 system, and you want VT's, you will d133 3 d171 1 a171 1 2. Both Gcc, and ProWorks are supported by XFree86. Gcc-2.5.8 or gcc-2.7.2.3 d190 1 a190 1 With XFree86 3.3.2, you will need to setup a /opt/SUNWspro/bin directory d231 1 a231 1 Under Solaris 2.5 and later, there's a system driver (/dev/xsvc that pro- d308 1 a308 1 Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/SOLX86.sgml,v 3.12.2.6 1998/02/28 04:47:09 dawes Exp $ d408 1 a408 1 1. What is XFree86 3.3.2 .................................................... 1 d410 1 a410 1 2. Solaris for x86, versions on which XFree86 3.3.2 has been tested ......... 1 d464 1 a464 1 $XFree86: xc/programs/Xserver/hw/xfree86/doc/README.SOLX86,v 3.20.2.6 1998/02/28 13:05:35 dawes Exp $ @ 1.1.1.4 log @XFree86 3.3.3 sources @ text @d10 1 a10 1 Information for Solaris for x86 Users d12 1 a12 1 David Holland d14 1 a14 1 25 Feb 1998 d18 1 a18 1 1. What is XFree86 d20 6 a25 5 XFree86 is a port of X11R6.3 that supports several versions of Intel-based Unix. It is derived from X386 1.2 which was the X server distributed with X11R5. This release consists of many new features and performance improvements as well as many bug fixes. The release is available as source patches against the X Consortium code, as well as binary distributions for many architectures. d37 1 a37 1 2. Solaris for x86, versions on which XFree86 3.3.3 has been tested d41 2 d47 6 a61 1 documented below. a62 2 First, if you are running a Solaris 2.4 x86 system, and you want VT's, you will have to create the necessary devices first, so become root. d64 1 a64 1 First verify the chanmux device driver's major number is 100: d70 1 a70 1 Information for Solaris for x86 Users 1 d74 1 d76 2 d79 1 a79 1 Information for Solaris for x86 Users 2 d81 3 a83 5 # grep -i chanmux /etc/name_to_major chanmux 100 # d95 8 a102 8 # cd /dev # mknod vt01 c 100 1 # mknod vt02 c 100 2 # mknod vt03 c 100 3 # mknod vt04 c 100 4 # mknod vt05 c 100 5 # mknod vt06 c 100 6 # mknod vt07 c 100 7 a125 2 Alt-SysReq-F1 through Alt-SysReq-F7 enable VT screens 1-7 respec- tively (if the VT is active). a126 1 Alt-SysReq-n enables the next active VT screen. a127 1 Alt-SysReq-p enables the previous active VT screen. a128 1 Alt-SysReq-h returns to the console. d136 6 d143 1 d145 1 a145 1 Information for Solaris for x86 Users 3 d147 1 a193 2 4. If you don't have c++filt or if you have troubles in making World with c++filt, you need to set UseExportLists to NO in ~xc/config/cf/host.def. a196 3 5. If you are using ProWorks to compile the XFree86 distribution, you need to modify your PATH appropriately so the ProWorks tools are available. Normally, they should be in /opt/SUNWspro/bin d202 1 d206 2 a209 2 Information for Solaris for x86 Users 4 d211 3 d247 1 a247 1 xinit -- vt00 a260 7 Including /usr/openwin/lib in the LD_LIBRARY_PATH is recommended because some Sun supplied binaries were not compiled with LD_RUN_PATH set prop- erly at compile time. Motif and CDE applications may require /usr/dt/lib in your LD_LIBRARY_PATH too. d268 1 a270 1 Information for Solaris for x86 Users 5 d272 3 d276 2 d308 1 a308 1 Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/SOLX86.sgml,v 3.12.2.7 1998/11/07 13:37:49 dawes Exp $ d334 1 a334 8 Information for Solaris for x86 Users 6 d404 1 a404 1 CONTENTS d408 1 a408 1 1. What is XFree86 .......................................................... 1 d410 1 a410 1 2. Solaris for x86, versions on which XFree86 3.3.3 has been tested ......... 1 d460 1 a460 1 i d464 1 a464 1 $XFree86: xc/programs/Xserver/hw/xfree86/doc/README.SOLX86,v 3.20.2.9 1998/11/14 06:46:54 dawes Exp $ @ 1.1.1.5 log @XFree86 3.3.4 sources @ text @a0 1 Information for Solaris for x86 Users a1 1 David Holland d3 14 a16 1 25 Feb 1998 d22 3 a24 4 X11R5. This release consists of many new features and performance improve- ments as well as many bug fixes. The release is available as source patches against the X Consortium code, as well as binary distributions for many architectures. d30 1 d35 1 d44 1 d55 2 a56 2 First, if you are running a Solaris 2.4 x86 system, and you want VT's, you will have to create the necessary devices first, so become root. d60 14 d78 6 a83 3 If the number after 'chanmux' is anything but 100, I would suggest you imme- diately abort your attempt to create virtual terminals, and learn to live without them. d97 1 d100 2 a101 2 Secondly, for both 2.1, and 2.4 x86 systems, add a few lines to the inittab to enable logins on them. d112 1 d115 1 a115 2 Then execute the command 'init q' to immediately enable the virtual termi- nals. d128 14 a141 2 If you are using virtual terminals, you must leave at least one free for use by the Xserver. d145 9 a153 8 There are only a total of 8 available VT's (7 normal VT's + 1 console) not the usual 15. If you have all 8 allocated, and you attempt to allocate a additional VT you will panic the system. (This bug is worked around in the Solaris XFree86 Xserver.) From a programming stand point, they work pretty much as documented in the AT&T Unix System V/386 Release 4 Integrated Software Development Guide, how- ever a number of ioctl() calls are broken. a159 3 2. Both Gcc, and ProWorks are supported by XFree86. Gcc-2.5.8 or gcc-2.7.2.3 are suggested, Gcc-2.6.0 is known not to work. You also need to set HasGcc2 correctly in ~xc/config/cf/xf86site.def. d161 6 a166 2 You should also make certain your version of GCC predefines `sun'. 2.4.5 is known NOT to by default. If needed edit /usr/local/lib/gcc- d169 3 a171 3 Note: A Threaded Xlib compiled with GCC has subtle problems. It'll work 98% of the time, however clients will occasionally exhibit strange hangs. Most notably image viewers such as xv-3.10 exhibit this problem. d177 2 a178 2 GNU binutils. Don't install gas or ld from GNU binutils, use the one provided by Sun. d180 3 a182 3 With XFree86 3.3.2, you will need to setup a /opt/SUNWspro/bin direc- tory containing symbolic links named cc, CC, and c++filt pointing respectively to the actual gcc, g++ and c++filt commands. d185 3 a187 2 c++filt, you need to set UseExportLists to NO in ~xc/con- fig/cf/host.def. d193 13 d207 4 a210 4 problems with some GNU replacements for the utilities found there. So the /usr/ccs/bin versions of these programs must be found before any other possible GNU versions. (Most notably GNU 'ar' does not work dur- ing the build). d213 3 a215 3 servers, you need to compile, and install the Solaris x86 aperture driver for memory mapped I/O support. This driver is REQUIRED for the I128, P9000 and Mach 64 servers. d222 2 a223 2 Under Solaris 2.5 and later, there's a system driver (/dev/xsvc that provides this functionality. It will be detected automatically by the d231 1 d234 3 a236 3 1. If you have not made the Virtual Terminal devices, you will need to specify the terminal device to run the Xserver on. The correct device is vt00 so your xinit command would look like so: d240 3 a242 2 If you have made the virtual terminal devices you do not need to spec- ify the VT to run the Xserver on. d248 7 a254 7 /usr/X11R6/lib:/usr/openwin/lib:/usr/dt/lib. Including /usr/X11R6/lib in your LD_LIBRARY_PATH is probably not necessary, however it doesn't hurt. :) Including /usr/openwin/lib in the LD_LIBRARY_PATH is recommended because some Sun supplied binaries were not compiled with LD_RUN_PATH set properly at compile time. d259 23 a281 9 3. Xqueue is NOT supported under Solaris. The includes necessary for Xqueue are available, however the driver does not seem to be in the kernel. (Go figure) 4. If you want to use xdm with Solaris, extract the files from the shar file in /usr/X11R6/lib/X11/etc/XdmConf.svr4 into a temporary directory. The README file tells where the individual files need to be installed. Be sure to read through each file and make any site-specific changes that you need. d285 2 a286 2 1. The Solaris 2.1 for x86 OpenWindows filemgr does not work against a X11R5 Xserver, it probably will also not work against a X11R6 Xserver. d294 1 d297 8 a304 4 Bug reports need to be sent to XFree86@@XFree86.org, or posted to the comp.windows.x.i386unix newsgroup. Questions or comments about the Solaris support, or the Solaris distribution need to be made to davidh@@use.com, or danson@@lgc.com. a305 1 Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/SOLX86.sgml,v 3.12.2.6 1998/02/28 04:47:09 dawes Exp $ d310 155 a464 1 $XFree86: xc/programs/Xserver/hw/xfree86/doc/README.SOLX86,v 3.20.2.11 1999/06/25 08:56:43 hohndel Exp $ @