head	1.1;
access;
symbols
	pkgsrc-2026Q1:1.1.0.52
	pkgsrc-2026Q1-base:1.1
	pkgsrc-2025Q4:1.1.0.50
	pkgsrc-2025Q4-base:1.1
	pkgsrc-2025Q3:1.1.0.48
	pkgsrc-2025Q3-base:1.1
	pkgsrc-2025Q2:1.1.0.46
	pkgsrc-2025Q2-base:1.1
	pkgsrc-2025Q1:1.1.0.44
	pkgsrc-2025Q1-base:1.1
	pkgsrc-2024Q4:1.1.0.42
	pkgsrc-2024Q4-base:1.1
	pkgsrc-2024Q3:1.1.0.40
	pkgsrc-2024Q3-base:1.1
	pkgsrc-2024Q2:1.1.0.38
	pkgsrc-2024Q2-base:1.1
	pkgsrc-2024Q1:1.1.0.36
	pkgsrc-2024Q1-base:1.1
	pkgsrc-2023Q4:1.1.0.34
	pkgsrc-2023Q4-base:1.1
	pkgsrc-2023Q3:1.1.0.32
	pkgsrc-2023Q3-base:1.1
	pkgsrc-2023Q2:1.1.0.30
	pkgsrc-2023Q2-base:1.1
	pkgsrc-2023Q1:1.1.0.28
	pkgsrc-2023Q1-base:1.1
	pkgsrc-2022Q4:1.1.0.26
	pkgsrc-2022Q4-base:1.1
	pkgsrc-2022Q3:1.1.0.24
	pkgsrc-2022Q3-base:1.1
	pkgsrc-2022Q2:1.1.0.22
	pkgsrc-2022Q2-base:1.1
	pkgsrc-2022Q1:1.1.0.20
	pkgsrc-2022Q1-base:1.1
	pkgsrc-2021Q4:1.1.0.18
	pkgsrc-2021Q4-base:1.1
	pkgsrc-2021Q3:1.1.0.16
	pkgsrc-2021Q3-base:1.1
	pkgsrc-2021Q2:1.1.0.14
	pkgsrc-2021Q2-base:1.1
	pkgsrc-2021Q1:1.1.0.12
	pkgsrc-2021Q1-base:1.1
	pkgsrc-2020Q4:1.1.0.10
	pkgsrc-2020Q4-base:1.1
	pkgsrc-2020Q3:1.1.0.8
	pkgsrc-2020Q3-base:1.1
	pkgsrc-2020Q2:1.1.0.6
	pkgsrc-2020Q2-base:1.1
	pkgsrc-2020Q1:1.1.0.2
	pkgsrc-2020Q1-base:1.1
	pkgsrc-2019Q4:1.1.0.4
	pkgsrc-2019Q4-base:1.1;
locks; strict;
comment	@# @;


1.1
date	2019.10.08.20.48.49;	author bad;	state Exp;
branches;
next	;
commitid	wFL5zyI7pVb0D6GB;


desc
@@


1.1
log
@Add patches to build u-boot for NanoPi Duo2 and NanoPi R1.

From https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nano+pi-r1-and-duo2.patch
@
text
@$NetBSD$

--- arch/arm/dts/sun8i-h3-nanopi-duo2.dts.orig	2019-10-05 00:04:53.000000000 +0000
+++ arch/arm/dts/sun8i-h3-nanopi-duo2.dts
@@@@ -0,0 +1,98 @@@@
+/*
+ * adapted by Igor Pecovnik igor@@armbian.com
+ * Copyright (C) 2017 Jelle van der Waa <jelle@@vdwaa.nl>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "FriendlyARM NanoPi DUO 2";
+	compatible = "friendlyarm,nanopi-duo2", "allwinner,sun8i-h3";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "nanopi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			default-state = "on";
+		};
+
+		status {
+			label = "nanopi:blue:status";
+			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+		};
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	cd-inverted;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	/* USB VBUS is always on */
+	status = "okay";
+};
@