head	1.1;
access;
symbols
	pkgsrc-2026Q1:1.1.0.54
	pkgsrc-2026Q1-base:1.1
	pkgsrc-2025Q4:1.1.0.52
	pkgsrc-2025Q4-base:1.1
	pkgsrc-2025Q3:1.1.0.50
	pkgsrc-2025Q3-base:1.1
	pkgsrc-2025Q2:1.1.0.48
	pkgsrc-2025Q2-base:1.1
	pkgsrc-2025Q1:1.1.0.46
	pkgsrc-2025Q1-base:1.1
	pkgsrc-2024Q4:1.1.0.44
	pkgsrc-2024Q4-base:1.1
	pkgsrc-2024Q3:1.1.0.42
	pkgsrc-2024Q3-base:1.1
	pkgsrc-2024Q2:1.1.0.40
	pkgsrc-2024Q2-base:1.1
	pkgsrc-2024Q1:1.1.0.38
	pkgsrc-2024Q1-base:1.1
	pkgsrc-2023Q4:1.1.0.36
	pkgsrc-2023Q4-base:1.1
	pkgsrc-2023Q3:1.1.0.34
	pkgsrc-2023Q3-base:1.1
	pkgsrc-2023Q2:1.1.0.32
	pkgsrc-2023Q2-base:1.1
	pkgsrc-2023Q1:1.1.0.30
	pkgsrc-2023Q1-base:1.1
	pkgsrc-2022Q4:1.1.0.28
	pkgsrc-2022Q4-base:1.1
	pkgsrc-2022Q3:1.1.0.26
	pkgsrc-2022Q3-base:1.1
	pkgsrc-2022Q2:1.1.0.24
	pkgsrc-2022Q2-base:1.1
	pkgsrc-2022Q1:1.1.0.22
	pkgsrc-2022Q1-base:1.1
	pkgsrc-2021Q4:1.1.0.20
	pkgsrc-2021Q4-base:1.1
	pkgsrc-2021Q3:1.1.0.18
	pkgsrc-2021Q3-base:1.1
	pkgsrc-2021Q2:1.1.0.16
	pkgsrc-2021Q2-base:1.1
	pkgsrc-2021Q1:1.1.0.14
	pkgsrc-2021Q1-base:1.1
	pkgsrc-2020Q4:1.1.0.12
	pkgsrc-2020Q4-base:1.1
	pkgsrc-2020Q3:1.1.0.10
	pkgsrc-2020Q3-base:1.1
	pkgsrc-2020Q2:1.1.0.8
	pkgsrc-2020Q2-base:1.1
	pkgsrc-2020Q1:1.1.0.4
	pkgsrc-2020Q1-base:1.1
	pkgsrc-2019Q4:1.1.0.6
	pkgsrc-2019Q4-base:1.1
	pkgsrc-2019Q3:1.1.0.2
	pkgsrc-2019Q3-base:1.1;
locks; strict;
comment	@# @;


1.1
date	2019.07.18.19.18.33;	author bouyer;	state Exp;
branches;
next	;
commitid	sYvqEpzP3wKfGyvB;


desc
@@


1.1
log
@Newer lime2 boards (which now use a micrel etherner PHY) needs
CONFIG_GMAC_TX_DELAY=4
This doens't seem to hurt on older boards.
Bump PKGREVSIONs
@
text
@$NetBSD: patch-configs_bananapi_m2_zero_defconfig,v 1.1 2019/06/05 05:43:16 thorpej Exp $

CONFIG_GMAC_TX_DELAY=4 required for lime2 boards with a Micrel PHY,
doesn't hurt for older ones (with the realtek PHY)

--- configs/A20-OLinuXino-Lime2_defconfig.orig	2019-07-17 18:57:03.912432611 +0200
+++ configs/A20-OLinuXino-Lime2_defconfig	2019-07-17 18:59:35.091714198 +0200
@@@@ -9,6 +9,7 @@@@
 CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
+CONFIG_GMAC_TX_DELAY=4
 CONFIG_NR_DRAM_BANKS=1
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_I2C_SUPPORT=y
@