head	1.2;
access;
symbols
	perseant-exfatfs-base-20250801:1.2
	perseant-exfatfs-base-20240630:1.2
	perseant-exfatfs:1.2.0.6
	perseant-exfatfs-base:1.2
	netbsd-8-3-RELEASE:1.1.1.2
	cjep_sun2x:1.2.0.4
	cjep_sun2x-base:1.2
	cjep_staticlib_x-base1:1.2
	cjep_staticlib_x:1.2.0.2
	cjep_staticlib_x-base:1.2
	phil-wifi-20200421:1.2
	phil-wifi-20200411:1.2
	phil-wifi-20200406:1.2
	netbsd-8-2-RELEASE:1.1.1.2
	netbsd-8-1-RELEASE:1.1.1.2
	netbsd-8-1-RC1:1.1.1.2
	pgoyette-compat-merge-20190127:1.1.1.2.14.1
	pgoyette-compat-20190127:1.2
	pgoyette-compat-20190118:1.2
	pgoyette-compat-1226:1.2
	pgoyette-compat-1126:1.2
	pgoyette-compat-1020:1.2
	pgoyette-compat-0930:1.2
	pgoyette-compat-0906:1.2
	netbsd-7-2-RELEASE:1.1.1.1
	pgoyette-compat-0728:1.2
	netbsd-8-0-RELEASE:1.1.1.2
	pgoyette-compat-0625:1.2
	netbsd-8-0-RC2:1.1.1.2
	pgoyette-compat-0521:1.2
	pgoyette-compat-0502:1.2
	pgoyette-compat-0422:1.2
	netbsd-8-0-RC1:1.1.1.2
	pgoyette-compat-0415:1.2
	DHCP4_4_1:1.1.1.2
	pgoyette-compat-0407:1.1.1.2
	pgoyette-compat-0330:1.1.1.2
	pgoyette-compat-0322:1.1.1.2
	pgoyette-compat-0315:1.1.1.2
	netbsd-7-1-2-RELEASE:1.1.1.1
	pgoyette-compat:1.1.1.2.0.14
	pgoyette-compat-base:1.1.1.2
	netbsd-7-1-1-RELEASE:1.1.1.1
	matt-nb8-mediatek:1.1.1.2.0.12
	matt-nb8-mediatek-base:1.1.1.2
	perseant-stdc-iso10646:1.1.1.2.0.10
	perseant-stdc-iso10646-base:1.1.1.2
	netbsd-8:1.1.1.2.0.8
	netbsd-8-base:1.1.1.2
	prg-localcount2-base3:1.1.1.2
	prg-localcount2-base2:1.1.1.2
	prg-localcount2-base1:1.1.1.2
	prg-localcount2:1.1.1.2.0.6
	prg-localcount2-base:1.1.1.2
	pgoyette-localcount-20170426:1.1.1.2
	bouyer-socketcan-base1:1.1.1.2
	pgoyette-localcount-20170320:1.1.1.2
	netbsd-7-1:1.1.1.1.0.18
	netbsd-7-1-RELEASE:1.1.1.1
	netbsd-7-1-RC2:1.1.1.1
	netbsd-7-nhusb-base-20170116:1.1.1.1
	bouyer-socketcan:1.1.1.2.0.4
	bouyer-socketcan-base:1.1.1.2
	pgoyette-localcount-20170107:1.1.1.2
	netbsd-7-1-RC1:1.1.1.1
	pgoyette-localcount-20161104:1.1.1.2
	netbsd-7-0-2-RELEASE:1.1.1.1
	localcount-20160914:1.1.1.2
	netbsd-7-nhusb:1.1.1.1.0.16
	netbsd-7-nhusb-base:1.1.1.1
	pgoyette-localcount-20160806:1.1.1.2
	pgoyette-localcount-20160726:1.1.1.2
	pgoyette-localcount:1.1.1.2.0.2
	pgoyette-localcount-base:1.1.1.2
	netbsd-7-0-1-RELEASE:1.1.1.1
	DHCP4_3_3:1.1.1.2
	netbsd-7-0:1.1.1.1.0.14
	netbsd-7-0-RELEASE:1.1.1.1
	netbsd-7-0-RC3:1.1.1.1
	netbsd-7-0-RC2:1.1.1.1
	netbsd-7-0-RC1:1.1.1.1
	netbsd-7:1.1.1.1.0.12
	netbsd-7-base:1.1.1.1
	DHCP4_3_0:1.1.1.1
	yamt-pagecache:1.1.1.1.0.10
	yamt-pagecache-base9:1.1.1.1
	tls-earlyentropy:1.1.1.1.0.8
	tls-earlyentropy-base:1.1.1.1
	riastradh-xf86-video-intel-2-7-1-pre-2-21-15:1.1.1.1
	riastradh-drm2-base3:1.1.1.1
	riastradh-drm2-base2:1.1.1.1
	riastradh-drm2-base1:1.1.1.1
	riastradh-drm2:1.1.1.1.0.6
	riastradh-drm2-base:1.1.1.1
	tls-maxphys-base:1.1.1.1
	tls-maxphys:1.1.1.1.0.4
	khorben-n900:1.1.1.1.0.2
	DHCP4_2_5_P1:1.1.1.1
	DHCP4_2_5:1.1.1.1
	DHCP4_2_3:1.1.1.1
	ISC:1.1.1;
locks; strict;
comment	@# @;


1.2
date	2018.04.07.22.39.57;	author christos;	state dead;
branches;
next	1.1;
commitid	GG8y5M7UQEDETyxA;

1.1
date	2013.03.24.15.45.48;	author christos;	state Exp;
branches
	1.1.1.1;
next	;

1.1.1.1
date	2013.03.24.15.45.48;	author christos;	state Exp;
branches
	1.1.1.1.4.1
	1.1.1.1.10.1;
next	1.1.1.2;

1.1.1.2
date	2016.01.10.19.44.28;	author christos;	state Exp;
branches
	1.1.1.2.14.1;
next	;
commitid	BVVWEhbnzCOxdqQy;

1.1.1.1.4.1
date	2013.03.24.15.45.48;	author tls;	state dead;
branches;
next	1.1.1.1.4.2;
commitid	OnlO1cBgtQRcIHUw;

1.1.1.1.4.2
date	2013.06.23.06.26.28;	author tls;	state Exp;
branches;
next	;
commitid	OnlO1cBgtQRcIHUw;

1.1.1.1.10.1
date	2013.03.24.15.45.48;	author yamt;	state dead;
branches;
next	1.1.1.1.10.2;
commitid	71DOv9lBdoc77yBx;

1.1.1.1.10.2
date	2014.05.22.15.44.32;	author yamt;	state Exp;
branches;
next	;
commitid	71DOv9lBdoc77yBx;

1.1.1.2.14.1
date	2018.04.16.01.58.09;	author pgoyette;	state dead;
branches;
next	;
commitid	qk3nktk0szmTIByA;


desc
@@


1.2
log
@moved dhcp to mpl
@
text
@# Server configuration file example for DHCPv6
# From the file used for TAHI tests.

# IPv6 address valid lifetime
#  (at the end the address is no longer usable by the client)
#  (set to 30 days, the usual IPv6 default)
default-lease-time 2592000;

# IPv6 address preferred lifetime
#  (at the end the address is deprecated, i.e., the client should use
#   other addresses for new connections)
#  (set to 7 days, the	usual IPv6 default)
preferred-lifetime 604800;

# T1, the delay before Renew
#  (default is 1/2 preferred lifetime)
#  (set to 1 hour)
option dhcp-renewal-time 3600;

# T2, the delay before Rebind (if Renews failed)
#  (default is 3/4 preferred lifetime)
#  (set to 2 hours)
option dhcp-rebinding-time 7200;

# Enable RFC 5007 support (same than for DHCPv4)
allow leasequery;

# Global definitions for name server address(es) and domain search list
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e;
option dhcp6.domain-search "test.example.com","example.com";

# Set preference to 255 (maximum) in order to avoid waiting for
# additional servers when there is only one
##option dhcp6.preference 255;

# Server side command to enable rapid-commit (2 packet exchange)
##option dhcp6.rapid-commit;

# The delay before information-request refresh
#  (minimum is 10 minutes, maximum one day, default is to not refresh)
#  (set to 6 hours)
option dhcp6.info-refresh-time 21600;

# The path of the lease file
dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases";

# Static definition (must be global)
host myclient {
	# The entry is looked up by this
	host-identifier option
		dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;

	# A fixed address
	fixed-address6 3ffe:501:ffff:100::1234;

	# A fixed prefix
	fixed-prefix6 3ffe:501:ffff:101::/64;

	# Override of the global definitions,
	# works only when a resource (address or prefix) is assigned
	option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e;

	# For debug (to see when the entry statements are executed)
	#  (log "sol" when a matching Solicitation is received)
	##if packet(0,1) = 1 { log(debug,"sol"); }
}

host otherclient {
        # This host entry is hopefully matched if the client supplies a DUID-LL
        # or DUID-LLT containing this MAC address.
        hardware ethernet 01:00:80:a2:55:67;

        fixed-address6 3ffe:501:ffff:100::4321;
}

# The subnet where the server is attached
#  (i.e., the server has an address in this subnet)
subnet6 3ffe:501:ffff:100::/64 {
	# Two addresses available to clients
	#  (the third client should get NoAddrsAvail)
	range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11;

	# Use the whole /64 prefix for temporary addresses
	#  (i.e., direct application of RFC 4941)
	range6 3ffe:501:ffff:100:: temporary;

	# Some /64 prefixes available for Prefix Delegation (RFC 3633)
	prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64;
}

# A second subnet behind a relay agent
subnet6 3ffe:501:ffff:101::/64 {
	range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11;

	# Override of the global definitions,
	# works only when a resource (address or prefix) is assigned
	option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e;

}

# A third subnet behind a relay agent chain
subnet6 3ffe:501:ffff:102::/64 {
	range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11;
}

@


1.1
log
@Initial revision
@
text
@@


1.1.1.1
log
@from ftp.isc.org
@
text
@@


1.1.1.2
log
@import new dhcp
@
text
@d2 1
a2 2
# From the file used for TAHI tests - addresses chosen
# to match TAHI rather than example block.
@


1.1.1.2.14.1
log
@Sync with HEAD, resolve some conflicts
@
text
@@


1.1.1.1.10.1
log
@file dhcpd-dhcpv6.conf was added on branch yamt-pagecache on 2014-05-22 15:44:32 +0000
@
text
@d1 105
@


1.1.1.1.10.2
log
@sync with head.

for a reference, the tree before this commit was tagged
as yamt-pagecache-tag8.

this commit was splitted into small chunks to avoid
a limitation of cvs.  ("Protocol error: too many arguments")
@
text
@a0 105
# Server configuration file example for DHCPv6
# From the file used for TAHI tests.

# IPv6 address valid lifetime
#  (at the end the address is no longer usable by the client)
#  (set to 30 days, the usual IPv6 default)
default-lease-time 2592000;

# IPv6 address preferred lifetime
#  (at the end the address is deprecated, i.e., the client should use
#   other addresses for new connections)
#  (set to 7 days, the	usual IPv6 default)
preferred-lifetime 604800;

# T1, the delay before Renew
#  (default is 1/2 preferred lifetime)
#  (set to 1 hour)
option dhcp-renewal-time 3600;

# T2, the delay before Rebind (if Renews failed)
#  (default is 3/4 preferred lifetime)
#  (set to 2 hours)
option dhcp-rebinding-time 7200;

# Enable RFC 5007 support (same than for DHCPv4)
allow leasequery;

# Global definitions for name server address(es) and domain search list
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e;
option dhcp6.domain-search "test.example.com","example.com";

# Set preference to 255 (maximum) in order to avoid waiting for
# additional servers when there is only one
##option dhcp6.preference 255;

# Server side command to enable rapid-commit (2 packet exchange)
##option dhcp6.rapid-commit;

# The delay before information-request refresh
#  (minimum is 10 minutes, maximum one day, default is to not refresh)
#  (set to 6 hours)
option dhcp6.info-refresh-time 21600;

# The path of the lease file
dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases";

# Static definition (must be global)
host myclient {
	# The entry is looked up by this
	host-identifier option
		dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;

	# A fixed address
	fixed-address6 3ffe:501:ffff:100::1234;

	# A fixed prefix
	fixed-prefix6 3ffe:501:ffff:101::/64;

	# Override of the global definitions,
	# works only when a resource (address or prefix) is assigned
	option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e;

	# For debug (to see when the entry statements are executed)
	#  (log "sol" when a matching Solicitation is received)
	##if packet(0,1) = 1 { log(debug,"sol"); }
}

host otherclient {
        # This host entry is hopefully matched if the client supplies a DUID-LL
        # or DUID-LLT containing this MAC address.
        hardware ethernet 01:00:80:a2:55:67;

        fixed-address6 3ffe:501:ffff:100::4321;
}

# The subnet where the server is attached
#  (i.e., the server has an address in this subnet)
subnet6 3ffe:501:ffff:100::/64 {
	# Two addresses available to clients
	#  (the third client should get NoAddrsAvail)
	range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11;

	# Use the whole /64 prefix for temporary addresses
	#  (i.e., direct application of RFC 4941)
	range6 3ffe:501:ffff:100:: temporary;

	# Some /64 prefixes available for Prefix Delegation (RFC 3633)
	prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64;
}

# A second subnet behind a relay agent
subnet6 3ffe:501:ffff:101::/64 {
	range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11;

	# Override of the global definitions,
	# works only when a resource (address or prefix) is assigned
	option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e;

}

# A third subnet behind a relay agent chain
subnet6 3ffe:501:ffff:102::/64 {
	range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11;
}

@


1.1.1.1.4.1
log
@file dhcpd-dhcpv6.conf was added on branch tls-maxphys on 2013-06-23 06:26:28 +0000
@
text
@d1 105
@


1.1.1.1.4.2
log
@resync from head
@
text
@a0 105
# Server configuration file example for DHCPv6
# From the file used for TAHI tests.

# IPv6 address valid lifetime
#  (at the end the address is no longer usable by the client)
#  (set to 30 days, the usual IPv6 default)
default-lease-time 2592000;

# IPv6 address preferred lifetime
#  (at the end the address is deprecated, i.e., the client should use
#   other addresses for new connections)
#  (set to 7 days, the	usual IPv6 default)
preferred-lifetime 604800;

# T1, the delay before Renew
#  (default is 1/2 preferred lifetime)
#  (set to 1 hour)
option dhcp-renewal-time 3600;

# T2, the delay before Rebind (if Renews failed)
#  (default is 3/4 preferred lifetime)
#  (set to 2 hours)
option dhcp-rebinding-time 7200;

# Enable RFC 5007 support (same than for DHCPv4)
allow leasequery;

# Global definitions for name server address(es) and domain search list
option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e;
option dhcp6.domain-search "test.example.com","example.com";

# Set preference to 255 (maximum) in order to avoid waiting for
# additional servers when there is only one
##option dhcp6.preference 255;

# Server side command to enable rapid-commit (2 packet exchange)
##option dhcp6.rapid-commit;

# The delay before information-request refresh
#  (minimum is 10 minutes, maximum one day, default is to not refresh)
#  (set to 6 hours)
option dhcp6.info-refresh-time 21600;

# The path of the lease file
dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases";

# Static definition (must be global)
host myclient {
	# The entry is looked up by this
	host-identifier option
		dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2;

	# A fixed address
	fixed-address6 3ffe:501:ffff:100::1234;

	# A fixed prefix
	fixed-prefix6 3ffe:501:ffff:101::/64;

	# Override of the global definitions,
	# works only when a resource (address or prefix) is assigned
	option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e;

	# For debug (to see when the entry statements are executed)
	#  (log "sol" when a matching Solicitation is received)
	##if packet(0,1) = 1 { log(debug,"sol"); }
}

host otherclient {
        # This host entry is hopefully matched if the client supplies a DUID-LL
        # or DUID-LLT containing this MAC address.
        hardware ethernet 01:00:80:a2:55:67;

        fixed-address6 3ffe:501:ffff:100::4321;
}

# The subnet where the server is attached
#  (i.e., the server has an address in this subnet)
subnet6 3ffe:501:ffff:100::/64 {
	# Two addresses available to clients
	#  (the third client should get NoAddrsAvail)
	range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11;

	# Use the whole /64 prefix for temporary addresses
	#  (i.e., direct application of RFC 4941)
	range6 3ffe:501:ffff:100:: temporary;

	# Some /64 prefixes available for Prefix Delegation (RFC 3633)
	prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64;
}

# A second subnet behind a relay agent
subnet6 3ffe:501:ffff:101::/64 {
	range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11;

	# Override of the global definitions,
	# works only when a resource (address or prefix) is assigned
	option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e;

}

# A third subnet behind a relay agent chain
subnet6 3ffe:501:ffff:102::/64 {
	range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11;
}

@