head 1.1; branch 1.1.1; access; symbols netbsd-11-0-RC6:1.1.1.1 netbsd-11-0-RC5:1.1.1.1 netbsd-11-0-RC4:1.1.1.1 netbsd-11-0-RC3:1.1.1.1 gdb-17-1:1.1.1.2 netbsd-11-0-RC2:1.1.1.1 netbsd-11-0-RC1:1.1.1.1 gdb-16-3:1.1.1.1 perseant-exfatfs-base-20250801:1.1.1.1 netbsd-11:1.1.1.1.0.30 netbsd-11-base:1.1.1.1 netbsd-10-1-RELEASE:1.1.1.1 gdb-15-1:1.1.1.1 perseant-exfatfs-base-20240630:1.1.1.1 perseant-exfatfs:1.1.1.1.0.28 perseant-exfatfs-base:1.1.1.1 netbsd-8-3-RELEASE:1.1.1.1 netbsd-9-4-RELEASE:1.1.1.1 netbsd-10-0-RELEASE:1.1.1.1 netbsd-10-0-RC6:1.1.1.1 netbsd-10-0-RC5:1.1.1.1 netbsd-10-0-RC4:1.1.1.1 netbsd-10-0-RC3:1.1.1.1 netbsd-10-0-RC2:1.1.1.1 netbsd-10-0-RC1:1.1.1.1 gdb-13-2:1.1.1.1 netbsd-10:1.1.1.1.0.26 netbsd-10-base:1.1.1.1 netbsd-9-3-RELEASE:1.1.1.1 cjep_sun2x-base1:1.1.1.1 cjep_sun2x:1.1.1.1.0.24 cjep_sun2x-base:1.1.1.1 cjep_staticlib_x-base1:1.1.1.1 netbsd-9-2-RELEASE:1.1.1.1 cjep_staticlib_x:1.1.1.1.0.22 cjep_staticlib_x-base:1.1.1.1 netbsd-9-1-RELEASE:1.1.1.1 GDB-11-0-50-20200914-git:1.1.1.1 phil-wifi-20200421:1.1.1.1 phil-wifi-20200411:1.1.1.1 is-mlppp:1.1.1.1.0.20 is-mlppp-base:1.1.1.1 phil-wifi-20200406:1.1.1.1 netbsd-8-2-RELEASE:1.1.1.1 netbsd-9-0-RELEASE:1.1.1.1 netbsd-9-0-RC2:1.1.1.1 netbsd-9-0-RC1:1.1.1.1 phil-wifi-20191119:1.1.1.1 netbsd-9:1.1.1.1.0.18 netbsd-9-base:1.1.1.1 phil-wifi-20190609:1.1.1.1 netbsd-8-1-RELEASE:1.1.1.1 gdb-8-3:1.1.1.1 netbsd-8-1-RC1:1.1.1.1 pgoyette-compat-merge-20190127:1.1.1.1 pgoyette-compat-20190127:1.1.1.1 pgoyette-compat-20190118:1.1.1.1 pgoyette-compat-1226:1.1.1.1 pgoyette-compat-1126:1.1.1.1 pgoyette-compat-1020:1.1.1.1 pgoyette-compat-0930:1.1.1.1 pgoyette-compat-0906:1.1.1.1 pgoyette-compat-0728:1.1.1.1 netbsd-8-0-RELEASE:1.1.1.1 phil-wifi:1.1.1.1.0.16 phil-wifi-base:1.1.1.1 pgoyette-compat-0625:1.1.1.1 netbsd-8-0-RC2:1.1.1.1 pgoyette-compat-0521:1.1.1.1 pgoyette-compat-0502:1.1.1.1 pgoyette-compat-0422:1.1.1.1 netbsd-8-0-RC1:1.1.1.1 pgoyette-compat-0415:1.1.1.1 pgoyette-compat-0407:1.1.1.1 pgoyette-compat-0330:1.1.1.1 pgoyette-compat-0322:1.1.1.1 pgoyette-compat-0315:1.1.1.1 pgoyette-compat:1.1.1.1.0.14 pgoyette-compat-base:1.1.1.1 gdb-8-0-1:1.1.1.1 matt-nb8-mediatek:1.1.1.1.0.12 matt-nb8-mediatek-base:1.1.1.1 perseant-stdc-iso10646:1.1.1.1.0.10 perseant-stdc-iso10646-base:1.1.1.1 netbsd-8:1.1.1.1.0.8 netbsd-8-base:1.1.1.1 prg-localcount2-base3:1.1.1.1 prg-localcount2-base2:1.1.1.1 prg-localcount2-base1:1.1.1.1 prg-localcount2:1.1.1.1.0.6 prg-localcount2-base:1.1.1.1 pgoyette-localcount-20170426:1.1.1.1 bouyer-socketcan-base1:1.1.1.1 pgoyette-localcount-20170320:1.1.1.1 bouyer-socketcan:1.1.1.1.0.4 bouyer-socketcan-base:1.1.1.1 pgoyette-localcount-20170107:1.1.1.1 pgoyette-localcount-20161104:1.1.1.1 gdb-7-12:1.1.1.1 localcount-20160914:1.1.1.1 pgoyette-localcount-20160806:1.1.1.1 pgoyette-localcount-20160726:1.1.1.1 pgoyette-localcount:1.1.1.1.0.2 pgoyette-localcount-base:1.1.1.1 gdb-7-10-1:1.1.1.1 FSF:1.1.1; locks; strict; comment @# @; 1.1 date 2016.02.03.03.00.20; author christos; state Exp; branches 1.1.1.1; next ; commitid uy8uLhh4ZQtrSpTy; 1.1.1.1 date 2016.02.03.03.00.20; author christos; state Exp; branches; next 1.1.1.2; commitid uy8uLhh4ZQtrSpTy; 1.1.1.2 date 2026.03.14.20.45.20; author christos; state Exp; branches; next ; commitid FYd84EijbJAv3ZxG; desc @@ 1.1 log @Initial revision @ text @See below some functions declarations for Visual Basic. Frequently Asked Question: Q: Each time I use the compress function I get the -5 error (not enough room in the output buffer). A: Make sure that the length of the compressed buffer is passed by reference ("as any"), not by value ("as long"). Also check that before the call of compress this length is equal to the total size of the compressed buffer and not zero. From: "Jon Caruana" Subject: Re: How to port zlib declares to vb? Date: Mon, 28 Oct 1996 18:33:03 -0600 Got the answer! (I haven't had time to check this but it's what I got, and looks correct): He has the following routines working: compress uncompress gzopen gzwrite gzread gzclose Declares follow: (Quoted from Carlos Rios , in Vb4 form) #If Win16 Then 'Use Win16 calls. Declare Function compress Lib "ZLIB.DLL" (ByVal compr As String, comprLen As Any, ByVal buf As String, ByVal buflen As Long) As Integer Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr As String, uncomprLen As Any, ByVal compr As String, ByVal lcompr As Long) As Integer Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As String, ByVal mode As String) As Long Declare Function gzread Lib "ZLIB.DLL" (ByVal file As Long, ByVal uncompr As String, ByVal uncomprLen As Integer) As Integer Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As Long, ByVal uncompr As String, ByVal uncomprLen As Integer) As Integer Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As Long) As Integer #Else Declare Function compress Lib "ZLIB32.DLL" (ByVal compr As String, comprLen As Any, ByVal buf As String, ByVal buflen As Long) As Integer Declare Function uncompress Lib "ZLIB32.DLL" (ByVal uncompr As String, uncomprLen As Any, ByVal compr As String, ByVal lcompr As Long) As Long Declare Function gzopen Lib "ZLIB32.DLL" (ByVal file As String, ByVal mode As String) As Long Declare Function gzread Lib "ZLIB32.DLL" (ByVal file As Long, ByVal uncompr As String, ByVal uncomprLen As Long) As Long Declare Function gzwrite Lib "ZLIB32.DLL" (ByVal file As Long, ByVal uncompr As String, ByVal uncomprLen As Long) As Long Declare Function gzclose Lib "ZLIB32.DLL" (ByVal file As Long) As Long #End If -Jon Caruana jon-net@@usa.net Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member Here is another example from Michael that he says conforms to the VB guidelines, and that solves the problem of not knowing the uncompressed size by storing it at the end of the file: 'Calling the functions: 'bracket meaning: [optional] {Range of possible values} 'Call subCompressFile( [, , [level of compression {1..9}]]) 'Call subUncompressFile() Option Explicit Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller' Private Const SUCCESS As Long = 0 Private Const strFilExt As String = ".cpr" Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long, ByVal level As Integer) As Long Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long) As Long Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal strargCprFilPth As String, Optional ByVal intLvl As Integer = 9) Dim strCprPth As String Dim lngOriSiz As Long Dim lngCprSiz As Long Dim bytaryOri() As Byte Dim bytaryCpr() As Byte lngOriSiz = FileLen(strargOriFilPth) ReDim bytaryOri(lngOriSiz - 1) Open strargOriFilPth For Binary Access Read As #1 Get #1, , bytaryOri() Close #1 strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth) 'Select file path and name strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) = strFilExt, "", strFilExt) 'Add file extension if not exists lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit more space then original file size ReDim bytaryCpr(lngCprSiz - 1) If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) = SUCCESS Then lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100 ReDim Preserve bytaryCpr(lngCprSiz - 1) Open strCprPth For Binary Access Write As #1 Put #1, , bytaryCpr() Put #1, , lngOriSiz 'Add the the original size value to the end (last 4 bytes) Close #1 Else MsgBox "Compression error" End If Erase bytaryCpr Erase bytaryOri End Sub Public Sub subUncompressFile(ByVal strargFilPth As String) Dim bytaryCpr() As Byte Dim bytaryOri() As Byte Dim lngOriSiz As Long Dim lngCprSiz As Long Dim strOriPth As String lngCprSiz = FileLen(strargFilPth) ReDim bytaryCpr(lngCprSiz - 1) Open strargFilPth For Binary Access Read As #1 Get #1, , bytaryCpr() Close #1 'Read the original file size value: lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _ + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _ + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _ + bytaryCpr(lngCprSiz - 4) ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value ReDim bytaryOri(lngOriSiz - 1) If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS Then strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt)) Open strOriPth For Binary Access Write As #1 Put #1, , bytaryOri() Close #1 Else MsgBox "Uncompression error" End If Erase bytaryCpr Erase bytaryOri End Sub Public Property Get lngPercentSmaller() As Long lngPercentSmaller = lngpvtPcnSml End Property @ 1.1.1.1 log @Import gdb-7.10.1: 2015-06-30 H.J. Lu * configure.ac (ospace_frag): Enable for i?86*-*-elfiamcu target. * configure: Regenerate. 2015-05-13 John David Anglin * configure.ac: Disable configuration of GDB for HPUX targets. * configure: Regenerate. 2015-05-01 H.J. Lu PR ld/18355 * Makefile.def: Add extra_configure_flags to host zlib. * configure.ac (extra_host_zlib_configure_flags): New. Set to --enable-host-shared When bfd is to be built as shared library. AC_SUBST. * Makefile.in: Regenerated. 2015-04-15 Mike Frysinger Hans-Peter Nilsson Adjust src-release.sh for sim using the gdb create-version.sh. * src-release.sh (tar_compress): If there's a fifth parameter, use that in the getver call instead of $tool. (sim_release): Pass gdb as fifth parameter to tar_compress. (SIM_SUPPORT_DIRS): Add gdb/common/create-version.sh. 2015-04-14 Max Ostapenko * Makefile.tpl (EXTRA_HOST_EXPORTS): New variables. (EXTRA_BOOTSTRAP_FLAGS): Likewise. (check-[+module+]): Add EXTRA_HOST_EXPORTS and EXTRA_BOOTSTRAP_FLAGS. * Makefile.in: Regenerate. 2015-04-01 H.J. Lu * configure.ac: Add --with-system-zlib. * configure: Regenerated. 2015-03-31 H.J. Lu * src-release.sh: Don't configure with --with-target-subdir=. --disable-multilib. 2015-03-31 H.J. Lu * src-release.sh (DEVO_SUPPORT): Replace src-release with src-release.sh. 2015-03-30 Ed Schouten * config.sub: Update from upstream, to 2015-03-04 version. * config.guess: Likewise. 2015-03-30 H.J. Lu * Makefile.def (dependencies): Add all-zlib to all-bfd. * Makefile.in: Regenerated. 2015-03-28 H.J. Lu * src-release.sh (do_proto_toplev): Configure with --target --with-target-subdir and --disable-multilib. (BINUTILS_SUPPORT_DIRS): Add zlib. (GAS_SUPPORT_DIRS): Likewise. (GDB_SUPPORT_DIRS): Likewise. (SIM_SUPPORT_DIRS): Likewise. 2015-03-17 H.J. Lu * configure.ac (target_configdirs): Exclude target-zlib if target-libjava isn't built. * configure: Regenerated. 2015-03-17 H.J. Lu Sync with GCC 2014-06-13 Thomas Schwinge * config-ml.in: Robustify ac_configure_args parsing. 2015-03-16 H.J. Lu * Makefile.def: Updated from GCC trunk. * Makefile.tpl: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerated. * configure: Likewise. 2015-01-28 James Bowman * configure.ac: Add FT32 support. * configure: Regenerate. 2015-01-12 Anthony Green * configure.ac: Don't disable gprof for moxie. * configure: Rebuild. @ text @@ 1.1.1.2 log @Import gdb-17.1, previous was 16.3 This version of GDB includes the following changes and enhancements: * x86-64 CET shadow stack support * Debugging Linux programs that use AArch64 Guarded Control Stacks * GDB record feature now supports rv64gc architectures * 'info threads' command support for two new options '-stopped' and '-running' to limit the list of displayed threads. * On Linux and FreeBSD, the addresses shown by the 'info sharedlibrary' command are now for the full memory range allocated to the shared library. * Linux checkpoints now work with multiple inferiors * Improved linker namespace support * Warnings and error messages now start with an emoji (warning sign, or cross mark) if supported by the host charset. Configurable. * Built-in support for TLS on Linux as backup when libthread_db is not available. Supported on the x86_64, aarch64, ppc64, s390x, and riscv architectures, when compiled with GLIBC or MUSL. * New command "set riscv numeric-register-names" to display risc-v registers using their numeric names instead of their ABI names. * The Alpha target now supports target descriptions. Python API enhancements: * New class gdb.Color for dealing with colors, and new constant gdb.PARAM_COLOR * New gdb.ParameterPrefix class, to create new 'set/show' command prefixes. * New attribute gdb.Value.is_unavailable, this checks for unavailability like gdb.Value.is_optimized_out checks for optimized out values. * New gdb.warning() function to print a warning message, with GDB's standard 'warning' prefix (see emoji support entry below) * gdb.execute has an additional 'styling' argument. * Prefix commands (gdb.Command sub-classes) that don't have an invoke method now behave like builtin prefix commands when invoked without a sub-command name. * Setting the documentation string (__doc__) of a gdb.Parameter sub-class to the empty string, means GDB will only display the set_doc or show_doc strings in the set/show help output. Guile API enhancements: * New type for dealing with colors and constant PARAM_COLOR * Prefix commands (using make-command) that don't have a #:invoke property will now behave like builtin prefix commands when invoked without a sub-command name. * Eliding the #:doc string from make-parameter now means that GDB will use a default documentation string. * Setting #:doc to the empty string for make-parameter means GDB will only display the #:set_doc or #:show_doc strings in the set/show help output. Debugger Adapter Protocol changes: * GDB now supports the "completions" request. * New "--binary-output" command line option to disable LF translations (Windows only) New convenience variables: * $_colorsupport providing a comma-separated list of color space names supported by the terminal. * $linker_namespace_count and $_linker_namespace provide the list of active linker namespaces. Remote package additions and changes: * New 'binary-upload+' value in qSupported reply * The 'vFile:stat' command implementation has been corrected to use stat rather than lstat. * New vFile:lstat packet, useful for handling symbolic links * Support for the "id_str" attribute in 'qXfer:threads:read' XML answer. GDB/MI changes: * The =library-unloaded event now includes the 'ranges' field and the 'still-in-use' field. Configure changes: * Ability to select which file formats to include support for * New option --disable-gdb-compile to disable support for the compile subsystem. * New option --disable-gdb-dwarf-support to disable support for DWARF debug information in GDB. * New option --disable-gdb-mdebug-support to disable support for mdebug/ecoff debug information. Incompatible changes: * Support for Python versions older than 3.4 has been removed * Support for stabs debugging format and the a.out/dbx object format is deprecated, and will be removed in GDB 18. * UST (static tracepoint) gdbserver support has been removed @ text @d118 1 a118 1 Put #1, , lngOriSiz 'Add the original size value to the end @