head 1.1; branch 1.1.1; access; symbols netbsd-11-0-RC4:1.1.1.1 netbsd-11-0-RC3:1.1.1.1 netbsd-11-0-RC2:1.1.1.1 netbsd-11-0-RC1:1.1.1.1 perseant-exfatfs-base-20250801:1.1.1.1 netbsd-11:1.1.1.1.0.18 netbsd-11-base:1.1.1.1 netbsd-10-1-RELEASE:1.1.1.1 perseant-exfatfs-base-20240630:1.1.1.1 perseant-exfatfs:1.1.1.1.0.16 perseant-exfatfs-base:1.1.1.1 netbsd-9-4-RELEASE:1.1.1.1 netbsd-10-0-RELEASE:1.1.1.1 netbsd-10-0-RC6:1.1.1.1 netbsd-10-0-RC5:1.1.1.1 netbsd-10-0-RC4:1.1.1.1 netbsd-10-0-RC3:1.1.1.1 netbsd-10-0-RC2:1.1.1.1 netbsd-10-0-RC1:1.1.1.1 netbsd-10:1.1.1.1.0.14 netbsd-10-base:1.1.1.1 netbsd-9-3-RELEASE:1.1.1.1 DHCP4_4_3:1.1.1.1 cjep_sun2x-base1:1.1.1.1 cjep_sun2x:1.1.1.1.0.12 cjep_sun2x-base:1.1.1.1 cjep_staticlib_x-base1:1.1.1.1 DHCP4_4_2_P1:1.1.1.1 netbsd-9-2-RELEASE:1.1.1.1 cjep_staticlib_x:1.1.1.1.0.10 cjep_staticlib_x-base:1.1.1.1 netbsd-9-1-RELEASE:1.1.1.1 DHCP4_4_2:1.1.1.1 phil-wifi-20200421:1.1.1.1 phil-wifi-20200411:1.1.1.1 is-mlppp:1.1.1.1.0.8 is-mlppp-base:1.1.1.1 phil-wifi-20200406:1.1.1.1 netbsd-9-0-RELEASE:1.1.1.1 netbsd-9-0-RC2:1.1.1.1 netbsd-9-0-RC1:1.1.1.1 phil-wifi-20191119:1.1.1.1 netbsd-9:1.1.1.1.0.6 netbsd-9-base:1.1.1.1 phil-wifi-20190609:1.1.1.1 pgoyette-compat-merge-20190127:1.1.1.1.2.2 pgoyette-compat-20190127:1.1.1.1 pgoyette-compat-20190118:1.1.1.1 pgoyette-compat-1226:1.1.1.1 pgoyette-compat-1126:1.1.1.1 pgoyette-compat-1020:1.1.1.1 pgoyette-compat-0930:1.1.1.1 pgoyette-compat-0906:1.1.1.1 pgoyette-compat-0728:1.1.1.1 phil-wifi:1.1.1.1.0.4 phil-wifi-base:1.1.1.1 pgoyette-compat-0625:1.1.1.1 pgoyette-compat-0521:1.1.1.1 pgoyette-compat-0502:1.1.1.1 pgoyette-compat-0422:1.1.1.1 pgoyette-compat:1.1.1.1.0.2 pgoyette-compat-0415:1.1.1.1 DHCP4_4_1:1.1.1.1 ISC:1.1.1; locks; strict; comment @# @; 1.1 date 2018.04.07.22.34.25; author christos; state Exp; branches 1.1.1.1; next ; commitid ZVMAguZtny6GRyxA; 1.1.1.1 date 2018.04.07.22.34.25; author christos; state Exp; branches 1.1.1.1.2.1; next ; commitid ZVMAguZtny6GRyxA; 1.1.1.1.2.1 date 2018.04.07.22.34.25; author pgoyette; state dead; branches; next 1.1.1.1.2.2; commitid qk3nktk0szmTIByA; 1.1.1.1.2.2 date 2018.04.16.01.59.47; author pgoyette; state Exp; branches; next ; commitid qk3nktk0szmTIByA; desc @@ 1.1 log @Initial revision @ text @# Server configuration file example for DHCPv6 # From the file used for TAHI tests - addresses chosen # to match TAHI rather than example block. # IPv6 address valid lifetime # (at the end the address is no longer usable by the client) # (set to 30 days, the usual IPv6 default) default-lease-time 2592000; # IPv6 address preferred lifetime # (at the end the address is deprecated, i.e., the client should use # other addresses for new connections) # (set to 7 days, the usual IPv6 default) preferred-lifetime 604800; # T1, the delay before Renew # (default is 1/2 preferred lifetime) # (set to 1 hour) option dhcp-renewal-time 3600; # T2, the delay before Rebind (if Renews failed) # (default is 3/4 preferred lifetime) # (set to 2 hours) option dhcp-rebinding-time 7200; # Enable RFC 5007 support (same than for DHCPv4) allow leasequery; # Global definitions for name server address(es) and domain search list option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e; option dhcp6.domain-search "test.example.com","example.com"; # Set preference to 255 (maximum) in order to avoid waiting for # additional servers when there is only one ##option dhcp6.preference 255; # Server side command to enable rapid-commit (2 packet exchange) ##option dhcp6.rapid-commit; # The delay before information-request refresh # (minimum is 10 minutes, maximum one day, default is to not refresh) # (set to 6 hours) option dhcp6.info-refresh-time 21600; # The path of the lease file dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases"; # Static definition (must be global) host myclient { # The entry is looked up by this host-identifier option dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2; # A fixed address fixed-address6 3ffe:501:ffff:100::1234; # A fixed prefix fixed-prefix6 3ffe:501:ffff:101::/64; # Override of the global definitions, # works only when a resource (address or prefix) is assigned option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e; # For debug (to see when the entry statements are executed) # (log "sol" when a matching Solicitation is received) ##if packet(0,1) = 1 { log(debug,"sol"); } } host otherclient { # This host entry is hopefully matched if the client supplies a DUID-LL # or DUID-LLT containing this MAC address. hardware ethernet 01:00:80:a2:55:67; fixed-address6 3ffe:501:ffff:100::4321; } # The subnet where the server is attached # (i.e., the server has an address in this subnet) subnet6 3ffe:501:ffff:100::/64 { # Two addresses available to clients # (the third client should get NoAddrsAvail) range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11; # Use the whole /64 prefix for temporary addresses # (i.e., direct application of RFC 4941) range6 3ffe:501:ffff:100:: temporary; # Some /64 prefixes available for Prefix Delegation (RFC 3633) prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64; } # A second subnet behind a relay agent subnet6 3ffe:501:ffff:101::/64 { range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11; # Override of the global definitions, # works only when a resource (address or prefix) is assigned option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e; } # A third subnet behind a relay agent chain subnet6 3ffe:501:ffff:102::/64 { range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11; } @ 1.1.1.1 log @import dhcp-4.4.1 @ text @@ 1.1.1.1.2.1 log @file dhcpd-dhcpv6.conf was added on branch pgoyette-compat on 2018-04-16 01:59:47 +0000 @ text @d1 106 @ 1.1.1.1.2.2 log @Sync with HEAD, resolve some conflicts @ text @a0 106 # Server configuration file example for DHCPv6 # From the file used for TAHI tests - addresses chosen # to match TAHI rather than example block. # IPv6 address valid lifetime # (at the end the address is no longer usable by the client) # (set to 30 days, the usual IPv6 default) default-lease-time 2592000; # IPv6 address preferred lifetime # (at the end the address is deprecated, i.e., the client should use # other addresses for new connections) # (set to 7 days, the usual IPv6 default) preferred-lifetime 604800; # T1, the delay before Renew # (default is 1/2 preferred lifetime) # (set to 1 hour) option dhcp-renewal-time 3600; # T2, the delay before Rebind (if Renews failed) # (default is 3/4 preferred lifetime) # (set to 2 hours) option dhcp-rebinding-time 7200; # Enable RFC 5007 support (same than for DHCPv4) allow leasequery; # Global definitions for name server address(es) and domain search list option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:3f3e; option dhcp6.domain-search "test.example.com","example.com"; # Set preference to 255 (maximum) in order to avoid waiting for # additional servers when there is only one ##option dhcp6.preference 255; # Server side command to enable rapid-commit (2 packet exchange) ##option dhcp6.rapid-commit; # The delay before information-request refresh # (minimum is 10 minutes, maximum one day, default is to not refresh) # (set to 6 hours) option dhcp6.info-refresh-time 21600; # The path of the lease file dhcpv6-lease-file-name "/usr/local/var/db/dhcpd6.leases"; # Static definition (must be global) host myclient { # The entry is looked up by this host-identifier option dhcp6.client-id 00:01:00:01:00:04:93:e0:00:00:00:00:a2:a2; # A fixed address fixed-address6 3ffe:501:ffff:100::1234; # A fixed prefix fixed-prefix6 3ffe:501:ffff:101::/64; # Override of the global definitions, # works only when a resource (address or prefix) is assigned option dhcp6.name-servers 3ffe:501:ffff:100:200:ff:fe00:4f4e; # For debug (to see when the entry statements are executed) # (log "sol" when a matching Solicitation is received) ##if packet(0,1) = 1 { log(debug,"sol"); } } host otherclient { # This host entry is hopefully matched if the client supplies a DUID-LL # or DUID-LLT containing this MAC address. hardware ethernet 01:00:80:a2:55:67; fixed-address6 3ffe:501:ffff:100::4321; } # The subnet where the server is attached # (i.e., the server has an address in this subnet) subnet6 3ffe:501:ffff:100::/64 { # Two addresses available to clients # (the third client should get NoAddrsAvail) range6 3ffe:501:ffff:100::10 3ffe:501:ffff:100::11; # Use the whole /64 prefix for temporary addresses # (i.e., direct application of RFC 4941) range6 3ffe:501:ffff:100:: temporary; # Some /64 prefixes available for Prefix Delegation (RFC 3633) prefix6 3ffe:501:ffff:100:: 3ffe:501:ffff:111:: /64; } # A second subnet behind a relay agent subnet6 3ffe:501:ffff:101::/64 { range6 3ffe:501:ffff:101::10 3ffe:501:ffff:101::11; # Override of the global definitions, # works only when a resource (address or prefix) is assigned option dhcp6.name-servers 3ffe:501:ffff:101:200:ff:fe00:3f3e; } # A third subnet behind a relay agent chain subnet6 3ffe:501:ffff:102::/64 { range6 3ffe:501:ffff:102::10 3ffe:501:ffff:102::11; } @